IMPRESIND gas radiant heating systems help large Spaces achieve on-demand heating and reduce operating costs-伊普赛德燃气辐射采暖-意科潘热水辐射板-高大空间采暖-北京正弘奥能环保科技有限公司

IMPRESIND gas radiant heating systems help large Spaces achieve on-demand heating and reduce operating costs

time：2025-05-06
hits：47次
source：正弘奥能

Gas radiant heating has long been applied abroad and has also been used in China. Currently, it is mostly adopted in high-space industrial buildings. The gas radiant heating system utilizes the combustion of natural gas in the generator to produce high-temperature flue gas. The generated flue gas flows in the negative pressure radiant tubes, causing the surface temperature of the radiant tubes to rise. The high-temperature surface of the radiant tubes generates infrared radiation, which transfers heat to the heating area. When infrared rays reach the human body, they are absorbed. The absorbed infrared rays are converted into heat energy, achieving the purpose of heating. Just like the sun in winter, the outdoor temperature is very low, but the sun emits infrared rays, and people will have a warm feeling. This approach has changed the traditional method of heating all the air in the entire space, directly heating the human body. There is no convection, no heat exchange or pipe loss, so the thermal efficiency can reach over 90%. 
 

	Compared with traditional boiler heating, gas infrared radiation heating has a very obvious energy-saving effect in solving the problem of industrial heating in large Spaces. Especially for places with intermittent use, the heating cost can be reduced by more than 30%. As the gas radiant heating method does not heat the air, it is particularly suitable for heating large industrial plants with poor insulation and sealing conditions and frequently open doors. The switch is fully controlled by intelligent software and hardware, with preset time and temperature. If it is automatically activated when going to work in the morning and automatically turned off after work, the on-duty temperature can be set at night, such as 5℃, maintaining a low temperature without the need for dedicated personnel to stand by. It can also achieve zoned temperature control. During individual overtime work, only some devices are turned on while the rest are turned off, achieving local heating and saving energy. No other heating methods can achieve this. This is an advanced energy-saving method for industrial heating in large Spaces that is currently quite popular in the world. Therefore, the operating cost of this heating form will be greatly reduced.


	 


	<img src="https://www.leadwaypower.com/Uploads/image/20250506/20250506093622_74593.jpg" alt="" />

 
IMPRESIND gas radiant heating system is an independent heating system, consisting of three parts: the generator, radiant pipes and the temperature control system. The generator burns natural gas, and the resulting hot fluid flows in the radiant tubes made of aluminum alloy and steel under the drive of a negative pressure centrifugal fan, generating infrared rays and directly applying the radiant heat to the heating area. This system is equipped with an advanced combustion and flue circulation system, ensuring complete combustion with a heat conversion rate of over 90%, and the emissions comply with national emission standards. The system has stable performance, is energy-saving and highly efficient, and is low-carbon and environmentally friendly. 
 
After the heat fluid completes heat exchange inside the radiant tube, a part of the products pass through the premixing chamber and are used for flue gas recirculation, greatly improving the heating efficiency and fully utilizing the energy. The two heating processes can achieve the goals of energy conservation, environmental protection and cost reduction in operation. The comprehensive energy savings can reach 30% to 50%.  
 

	It always automatically adjusts in the most optimized way according to the load demand and can be adjusted at different times and in different zones. The control system compares the temperature signals sent by the intelligent sensors, generates control instructions to intelligently adjust the temperature, improves the operational efficiency of the system, effectively reduces energy consumption, and better promotes behavioral energy conservation.


	 


	<img src="https://www.leadwaypower.com/Uploads/image/20250506/20250506093646_38169.jpg" alt="" />

 
Under the backdrop of the "dual carbon" goals, problems such as low efficiency and high energy consumption in traditional heating systems have become prominent. The demand for energy-saving and intelligent operation of heating systems in high-space industrial heating is extremely urgent. With the enhancement of environmental awareness and the advancement of energy transition, an increasing number of enterprises are beginning to seek environmentally friendly, energy-saving and intelligent heating solutions. Beijing Leadway Power Co., Ltd. is a provider of high-space industrial radiant heating solutions. Integrating "products + solutions + services", it offers high-quality infrared radiant heating equipment, overall heating solutions and services to multiple industries such as manufacturing, processing, transportation and logistics, helping enterprises reduce energy consumption and lower operation and maintenance costs. Create value for customers with all-round technology and services.