Solve the problem of poor heating effect and high energy consumption in large-space industrial heating -辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Solve the problem of poor heating effect and high energy consumption in large-space industrial heating

time：2024-09-05
hits：228次
source：正弘奥能

In traditional convective heating, the higher the heated air temperature, the higher the air temperature above the building, the greater the heat loss, resulting in greater energy consumption, which is not conducive to the long-term development of enterprise production. The use of radiation heating can solve the problem of poor effect and high energy consumption of convective heating in tall space. 
 

	The hot water radiant panel is a heating equipment installed in the indoor ceiling of a building and heated by means of infrared radiation heat transfer, and its essence is thermal radiation technology. Hot water radiant panel heating method from the design concept and material selection to overcome the long-term energy consumption problems of China's heating system, to reduce heating energy consumption is of great help, especially for large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions.


	 


	<img src="https://www.leadwaypower.com/Uploads/image/20240905/20240905104034_20282.png" alt="" />

 
The air temperature in the building is lower than the object temperature in the infrared irradiation area (generally 2-3 degrees lower), so the air stratification and convection effect are reduced, and the heating system has a high utilization rate of heat energy, which is an ideal energy-saving heating method for tall space buildings. In the hot water radiant panel heating environment, the heat distribution is uniform, the body feeling is comfortable and soft, and the local temperature is not uniform in the traditional convection heating environment. The staff feel warm and comfortable in any area, even in the place where the smoke is relatively large, but also greatly improve the indoor environmental quality. 
 

	By Beijing Leadway Power Co., LTD. Promotion and sales of the ECOPAN hot water radiation panel with innovative design concept. The ECOPAN hot water radiant panel is covered 2/3 of its surface with 1/2 "or 3/4" diameter welded or unwelded steel pipe. Special attention is paid to the expansion between the pipe and the plate, as well as technical solutions that make installation easier.


	 


	<img src="https://www.leadwaypower.com/Uploads/image/20240905/20240905104047_72328.png" alt="" />

 
As the warmest part of the panel, the pipe is completely downward, and 70% of its surface is wrapped by the metal plate (the wrapping Angle is more than 280°), which increases the heat transfer area, and perfectly ensures the transfer of heat from the tube to the plate, reducing the convective flow and increasing the radiation. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), the ECOPAN hot water radiant panel has a larger heating range and lower energy consumption, which can meet the need to reduce operating costs. 
 
ECOPAN hot water radiant panel adopts modular splicing, series type ribbon arrangement, two modules are directly connected by clamping joint, quick connection, simple and convenient installation. In addition, the hot water radiant panel heating system for the water system heating, low temperature and pressure, does not increase the fire rating of the building, can be used in volatile and flammable building environment, will not cause the risk of fire and explosion.