Gas radiation heating efficiently solves the problem of industrial heating in tall space-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Gas radiation heating efficiently solves the problem of industrial heating in tall space

time：2024-09-04
hits：200次
source：正弘奥能

Industry, construction and other fields are the key industry areas of energy conservation and emission reduction, of which industrial energy consumption accounts for about 60% of the whole society's energy consumption. In the building energy consumption in northern China, heating energy consumption accounts for about 20%, and the phenomenon of "high energy and low use" is common. In particular, many tall space industrial buildings heating, the overall heating effect is not good, the management mode is relatively extensive, the use of traditional heating methods, resulting in a lot of energy waste and carbon dioxide emissions. Therefore, industrial enterprises need to promote heating energy saving transformation, accelerate the replacement of environmental protection equipment, improve intelligent control performance, improve industrial heating energy efficiency, reduce the comprehensive energy consumption and operating costs of industrial buildings. 
 
The gas infrared radiation heating method is to use the combustion of clean energy such as natural gas and liquefied petroleum gas to radiate infrared rays for heating. As the principle of sunlight radiation to the earth, infrared rays are not absorbed by the atmosphere, directly radiate the heating object, the heating object absorbs infrared rays, and is converted into heat energy, so as to achieve the purpose of heating. According to GB50019-2015 Design Code for Heating, Ventilation and air conditioning of industrial buildings 5.5.4: When gas infrared radiation heating is used, the calculated indoor temperature should be 2℃ ~ 3℃ lower than the air temperature in the convective heating room. Therefore, the air stratification and convection effect are reduced, and the heat energy utilization rate of the heating system is higher. 
 

	A large number of projects at home and abroad show that this method is an ideal heating method for tall space, which is very suitable for all kinds of industrial plants, aircraft, railway, subway maintenance warehouses, warehouses and other industrial buildings with tall space. Under the premise of achieving the same heating effect, the heat load is lower, the comfort is higher, and it is more energy saving than the traditional convection heating method, which can greatly reduce the operating costs of enterprises.


	 


	<img src="https://www.leadwaypower.com/Uploads/image/20240904/20240904103752_51118.png" alt="" />

 
IMPRESIND gas radiant heating system, a product of Beijing Leadway Power Co., LTD., is an independent heating system composed of three parts: generator, radiation tube and temperature control system. The generator burns natural gas, and the hot fluid generated flows in the radiation tube made of aluminum alloy and steel under the drive of the negative pressure centrifugal fan, producing infrared radiation and directly acting the radiant heat on the heating area. The system has advanced combustion and flue circulation system, complete combustion, heat conversion rate of more than 90%, emissions meet the national emission standards. The system has stable performance, high efficiency, low carbon and environmental protection.