Large-space industrial heating energy saving renovation - gas infrared radiation heating-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Large-space industrial heating energy saving renovation - gas infrared radiation heating

time：2024-07-11
hits：392次
source：正弘奥能

With the development of science and technology, gas radiation heating equipment has overcome the problem of poor heating effect caused by large area and poor heating property in tall industrial buildings. The infrared radiation heat emitted by the gas radiation heating equipment is to directly heat the human body or equipment, and then heat the air through the secondary radiation such as the human body or equipment, the heat distribution is uniform, and the heating is rapid, which is very suitable for the heating of the tall space plant, and can achieve different temperature requirements in different areas of the same plant. This not only saves the cost of equipment, but also greatly saves the cost of use.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20240711/20240711094135_65775.png" alt="" />

 
In general, the traditional convection heating method requires more than 2 hours of preheating period, which is a great waste of energy, and gas radiation heating equipment will have a warm feeling after a few minutes, half an hour or so will reach the required temperature. The workshop will soon cool down after the general heater or central air conditioning switch is turned off, and the gas radiation heating equipment has the function of heat storage, and can maintain the required temperature within two hours of shutdown. In addition, if you use a heater or traditional heating method, the top of the tall space will be evenly heated, but those Spaces actually do not need to be heated, so it also directly causes a waste of energy. Overall, in a heating season, gas radiation heating can save 30%-50% energy than traditional convection heating. 
 

	IMPRESIND gas radiant heating system, a product of Beijing Leadway Power&nbsp;Co., LTD., is an independent heating system composed of three parts: generator, radiation tube and temperature control system. The generator burns natural gas, and the hot fluid generated flows in the radiation tube made of aluminum alloy and steel under the drive of the negative pressure centrifugal fan, producing infrared radiation and directly acting the radiant heat on the heating area. The system has advanced combustion and flue circulation system, complete combustion, heat conversion rate of more than 90%, emissions meet the national emission standards. The system has stable performance, high efficiency, low carbon and environmental protection.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20240711/20240711092916_42997.png" alt="" />

 
Gas recirculation system: 
After the heat exchange of the hot fluid is completed in the radiation tube, part of the product is used for flue gas recirculation through the premix chamber, which greatly improves the heating efficiency and makes full use of energy. Two heating to achieve the purpose of energy saving, environmental protection, reduce operating costs, comprehensive energy saving up to 30%~50%. 
 
Intelligent energy saving control: 
According to the load demand, it is always automatically adjusted in the optimal way, and can be adjusted by time sharing and zoning. The control system compares the temperature signal from the intelligent sensor and generates control instructions to adjust the temperature intelligently, improve the operating efficiency of the system, effectively reduce energy consumption, and better promote behavioral energy saving. 
 
Whether it is an industrial plant, storage logistics or aircraft, railway maintenance depot, IMPRESIND gas radiation heating equipment can be perfectly adapted. At this time, at the time of a new round of large-scale equipment renewal in China, industrial enterprises in northern China are also in urgent need of green construction and energy-saving transformation of heating systems. Therefore, the promotion and use of gas infrared radiation heating system in the industrial field can not only effectively promote industrial heating energy saving and carbon reduction, maximize economic benefits, but also promote related industries to high-end, green, intelligent, and achieve environmental benefits, economic benefits and social benefits.