Application of IMPRESIND gas radiant heating system in large-space heating in north China-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Application of IMPRESIND gas radiant heating system in large-space heating in north China

time：2024-06-26
hits：360次
source：正弘奥能

A remarkable feature of modern tall space buildings is that the indoor height is high, the volume is large, and the insulation of the wall and roof is usually not very good, more doors and Windows cause cold air penetration is very strong, the use of central heating, the end of the heat fin heating, in the Northeast can reach the standard of 5-10 degrees at most, so even if the heating company outputs a lot of heat, it can not get customer satisfaction. This is not the problem of the heating company, the root cause is determined by the nature of this convection heating method, that is, directly heating the air, caused by a large temperature gradient. Therefore, the traditional convection heating methods used in tall space buildings, such as heat sinks and forced hot air, are not the best solution. 
 

	Infrared radiation heating technology is the heating equipment to release heat to the heating space in the form of infrared heat radiation to achieve the purpose of heating. Infrared rays directly heat people and objects downward, so the indoor temperature gradient is small. Part of the radiant heat will also be absorbed by the ground, and part of the heat absorbed by the ground will reverse the radiation heating of the room, thereby increasing the heating effect, and the heat loss of the upper part of the building is also small. This way of heat transfer better solves the special problem of heating in tall space buildings, and can also meet the requirements of comfort. Therefore, it is particularly suitable for tall space buildings, so that radiant heat can save considerable energy than convective heating system. Save energy by more than 50%.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20240626/20240626093722_10990.jpg" alt="" /> 

 
IMPRESIND gas infrared radiation heating system, promoted and sold by Beijing Leadway Power Co., LTD., uses natural gas to burn in the generator to produce high temperature flue gas, the generated flue gas flows in the negative pressure radiation tube, so that the surface temperature of the radiation tube rises to 260-280℃, and the high temperature surface of the radiation tube generates infrared radiation waves to heat indoor objects. After the heat exchange of the flue gas inside the radiation tube is completed, part of the product will be used for recirculation heating, and the other part will be discharged outdoors. At present, the technology of gas radiation heating equipment is very mature, and it is completely feasible for the gas to be discharged directly to the outside after combustion, which meets the requirements of environmental protection. 
 
The use of IMPRESIND gas infrared radiation heating system can be designed according to the characteristics of tall space industrial plant buildings and the specific needs of customers, which is very suitable for the heating of tall space buildings such as industrial plants, aircraft, automobile maintenance warehouses, logistics centers, large warehouses, multi-functional stadiums, exhibition venues and so on. According to the heating needs of factories in the northern region, the heating temperature of the workshop can usually be set at 12-15 degrees during working hours, and the low temperature operation (5 degrees) or directly closed during non-working hours.