Energy saving heating solutions of large-space industrial building-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Energy saving heating solutions of large-space industrial building

time：2024-06-19
hits：383次
source：正弘奥能

In the total energy consumption of tall space industrial buildings, the energy consumption of industrial buildings accounts for about 20%, and the energy consumption at the use stage accounts for about 80%. Although the proportion of energy consumption between the two is very large, but they are interactive and complement each other. They can either add to each other or cancel each other out. It is impossible not to study infrared radiation heating, building energy saving here includes both the energy saving of building construction, but also the energy saving of building use stage. 
 
Compared with convective heating, infrared radiation heating improves the inner surface temperature of the enclosure structure (higher than the temperature of the room air), so compared with other traditional convective heating facilities, it can reduce the heating temperature, achieve energy saving, and create a favorable heating environment for the human body, reduce the radiation heat exchange of the human body to the inner surface of the enclosure structure, and increase comfort. Because the infrared radiation heating has the characteristics of uniform heat dissipation and thermal comfort, and has the advantages of convenient management, no occupation of the use area, no noise and no convection, high efficiency and energy saving, small maintenance, etc., it is especially suitable for occasions that are difficult to be solved by traditional heating methods, such as open space and occasions with large heat loss, rapid or intermittent heating occasions, and a large number of air exchange occasions. 
 

	For tall space buildings, infrared radiation heating equipment is suitable for use in places where waste heat is generated during operation and where there is no explosive gas, dust or medium, and the economic benefits are better. For the plant station without heat source but with natural gas, compared with the heating system of the new boiler room, the infrared radiation heating system should be a better choice of technology and economy. Especially the economic method, through the economic comparison of boiler water heating, infrared radiation heating system equipment assembly is economical and reasonable, and the technical economy is feasible when the investment declines.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20240619/20240619104217_92458.jpg" alt="" />


	<img src="http://www.leadwaypower.com/Uploads/image/20240619/20240619104227_64857.jpg" alt="" />

 
IMPRESIND gas radiation heating system generator, promoted and sold by Beijing Leadway Power Co., LTD., burns natural gas, and the hot fluid generated flows in the radiation tube made of aluminum alloy and steel under the drive of negative pressure centrifugal fan, stimulating infrared rays and directly acting radiant heat on objects and human bodies in the heating area. After the heat exchange of the hot fluid inside the radiation tube is finished, part of the product will be used for flue gas recirculation through the premix chamber, greatly improving the heating efficiency and making full use of energy. And the other part is directly discharged to the outside. Two heating to achieve the purpose of energy saving, environmental protection, reduce operating costs, comprehensive energy saving up to 30%~50%. The system is especially suitable for tall space buildings, because the system can carry out local adjustment and zoning temperature control functions, has become one of the common heating forms of industrial plants, hangars, logistics centers, exhibition halls, gymnasiums and other tall Spaces in China.