How does IMPRESIND Gas Infrared radiation heating System operate safely?-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

How does IMPRESIND Gas Infrared radiation heating System operate safely?

time：2024-06-12
hits：399次
source：正弘奥能

At present, many large space industrial plants still choose to use the traditional convection heating method. The hot air will produce a gradient effect in the tall space, and the temperature will increase by 1-1.5 degrees for every 1 meter rise in height, the air is seriously stratified, the upper heat is cold, and the roof heat loss is great. Therefore, the use of traditional heating equipment such as radiators, geothermal, and forced hot air in tall space industrial places is not the best heating solution. 
 

	In contrast, gas infrared radiation heating does not heat air, only the human body and dense objects, so there is no thermal gradient. Gas infrared radiation heating can meet human comfort requirements at 3 to 5 ° C lower than the traditional heating air temperature, without heating the entire space air to a higher temperature, such as 18 ° C. Practice has proved that gas infrared radiation heating technology can well solve the problem of unreasonable temperature distribution in a large space, theoretically save 30% ~ 50% energy than convective heating, and the economy is very obvious.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20240612/20240612091559_68622.png" alt="" />

 
IMPRESIND gas infrared radiation heating system, promoted and sold by Beijing Leadway Power Co., LTD., has an independent heater installed in the upper part of the building heating space, which does not occupy the building space. Radiant heat directly radiates downward, the ground can also store part of the heat, indoor air temperature gradient is small, small heat loss, reduce heat consumption under the premise of ensuring comfort, to achieve the purpose of energy saving. 
 
IMPRESIND gas infrared radiation heating equipment adopts negative pressure operation technology, the vacuum pump starts to work before the system ignition, and the controller confirms that the negative pressure is normal before the ignition test. When any link of the system (power supply, gas supply, negative pressure, ignition) fails, the system will automatically shut down. The safety of equipment and heating area is fully guaranteed. 
 
Each temperature control system includes a black ball temperature sensor and a controller. The black ball temperature sensor is installed in a representative position in the control area, the controller compares the temperature signal from the sensor, generates control instructions, and adjusts the control temperature by controlling the device on or off. The control area can be freely defined according to the user's requirements. In different control areas, users can set different indoor temperatures according to their needs. The controller can set the temperature for different periods of 24 hours according to the needs of users, and can set the on-duty heating temperature of 5 ° C, without the need to design special on-duty heating. It can also set the working state of the equipment on different dates within a week according to the needs of the user, such as opening time, temperature at different times, etc. 
 
Therefore, IMPRESIND gas infrared radiation heating technology is very suitable for all kinds of railways, subways and civil plants, garages and other buildings with tall space. Gas infrared radiation heating system is suitable for high space building without explosive gas, dust place, good economic benefits.