Application of ECOPAN hot water radiant panel in ultra-high space building-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Application of ECOPAN hot water radiant panel in ultra-high space building

time：2024-04-30
hits：490次
source：正弘奥能

At present, the heating method commonly used in domestic tall space buildings is still radiator or heater, because the cost of the two is relatively low. However, many academic conclusions and project practical experience at home and abroad have fully proved that convective heating is not suitable for tall space buildings with large heat transfer loss, large temperature gradient, and serious air stratification, nor does it meet the requirements of energy conservation and environmental protection advocated today. 
 

	Radiation heating method as the best solution to solve the problem of tall space heating, in the 1990s, gas radiation heating was first introduced into the country, applied to aircraft maintenance warehouse, railway vehicle maintenance warehouse and other tall space buildings. However, with circulating hot water as the medium, the heating system that also works on the principle of infrared heat transfer - hot water radiation panel is also suitable for industrial plants, warehouses, aircraft maintenance hangars, large stadiums, exhibition halls and other tall space buildings.


	 


	<img src="/Uploads/image/20240430/20240430105210_19894.jpg" alt="" />

 
According to reliable data, the world's largest aircraft manufacturer Airbus A380 final assembly factory in Toulouse, France, almost all the tall space buildings are installed with hot water radiation panels, radiation panels installed at a height of 40 meters. In such a large span of space, the hot water radiation plate through its radiation surface to convert the medium heat into various wavelengths of infrared radiation and irradiation into the heating environment, due to the small absorption of infrared air, most of the infrared is absorbed by buildings, human bodies, equipment and other objects, energy storage, temperature rise, while heating the air around it, so that the ambient temperature rise. 
 
ECOPAN hot water radiation panel introduced by Beijing Leadway Power&nbsp;Co., Ltd. is made of high-quality corrosion-resistant steel pipe, which greatly improves the heat transfer efficiency of the tube plate, eliminates the damage of expansion stress on the radiation plate and reduces the radiation efficiency, and ensures the quality of the product from the manufacturing process. ECOPAN hot water radiant panel adopts an innovative design concept, the pipe as the warmest part of the panel, completely down, and by the metal plate wrapped 70% of its surface (wrapping Angle of more than 280°), increasing the heat transfer area, excellent guarantee of heat transfer from the tube to the plate. 
 
ECOPAN hot water radiant panels are prefabricated in the factory into a standard length of 3 meters, 6 meters (special requirements can be prefabricated 2 meters, 4 meters). Each radiant panel can be connected by quick joint or welding. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. The bracket of the suspension plate is welded together with the radiant plate, one per meter, which greatly guarantees the flexibility of the installation.