Application of ECOPAN hot water radiant panel in large-space heating-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Application of ECOPAN hot water radiant panel in large-space heating

time：2024-04-18
hits：466次
source：正弘奥能

In the cold areas of the north, winter heating is very important, especially the spacious and open workshop and open office area, and in the office area or industrial workshop with large space, only the central air conditioning can not provide enough heat to ensure the indoor temperature, the radiator is only set on the surrounding wall, and the heat can not be transferred to the central area. Compared with traditional heating methods, infrared radiation heating has the characteristics and advantages of fast thermal effect, uniform heating, high thermal efficiency, high efficiency and energy saving, green environmental protection, etc. 
 
The application of hot water radiation panel greatly solves this problem, hot water radiation panel heating heat medium and heating are similar, are the use of hot water as a thermal medium to provide heat, but the difference is that hot water radiation panel hanging on the roof, which greatly saves the available space, and hot water radiation panel using radiation heat does not rely on the principle of heat transfer in the middle medium, Direct transfer of heat to persons and objects in the heating space. Therefore, hot water radiant panels have been increasingly used in industrial buildings, workshops and office areas. 
 

	The hot water radiant panel system has no fire hazard and no combustible components. The most suitable solution for heating industrial buildings with wood processing. Radiant heating provides the necessary comfort without air or dust moving around, and responds almost immediately to temperature changes in the room, which can occur due to the switching of the system and the heat load associated with the operation itself in the room. There are many important practical applications in the wood and furniture industry, from sawmills to large processing plants to storage warehouses.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20240418/20240418174330_53411.png" alt="" /> 

 
ECOPAN hot water radiant panel promoted and sold by Beijing Leadway Power Co., Ltd. can provide the best heating solution, which can not only make the construction operation easier, but also optimize the time, thereby reducing the cost. The side is formed in the radiant panel, easy to place the insulation material, the head of the pipe lining is welded perfectly, and the joint cover is easy to position, so that the installation time is shortened. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN panels have higher thermal energy efficiency than other products on the market. This allows for the use of fewer radiant panels to meet the same thermal energy efficiency requirements. ECOPAN Hot Water radiant panels can meet any engineering plan. 
 
ECOPAN hot water radiant panel features 
 
Save energy 
Infrared radiation heating, no convection phenomenon, small thermal inertia, no need for long time preheating, heating speed is fast. In tall Spaces, reducing vertical gradient heat loss means saving energy and economic costs. 
 
Static heating 
No fan operation, no noise, no air disturbance, quiet operation, avoid air convection ash phenomenon. Even in places where the smoke is relatively large, the staff will feel warm and comfortable. 
 
Convenient operation and maintenance 
The system does not require any special maintenance and has no moving mechanical parts. No need to set up a special post to manage and maintain. 
 
Long service life 
The hot water radiant panel has a service life of 30 years and low maintenance cost. It does not require any special maintenance, but is insignificant compared to its energy-saving characteristics. 
 
Easy to install 
The hot water radiant panel is prefabricated in the factory into a standard length of 3 meters, 6 meters (special requirements can be prefabricated 2 meters, 4 meters). Each radiant panel can be connected by quick joint or welding. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. The bracket of the suspension plate is welded together with the radiant plate, one per meter, which greatly guarantees the flexibility of the installation. 
 
Efficient heat transfer 
The hot water radiant panel adopts an innovative design concept, with the pipe as the warmest part of the panel, completely down, and 70% of the surface is wrapped by the metal plate (the wrapping Angle is more than 280°), which increases the heat transfer area and perfectly ensures the transfer of heat from the tube to the plate. 
 
ECOPAN hot water radiant panel heating system can be widely used in factory workshops, warehouses, aircraft maintenance warehouses, automobile repair warehouses, stadiums, museums, theaters, shopping malls, supermarkets and other public places with tall space, even if the insulation is not good indoor or even semi-open full open space, can achieve good heating effect.