ECOPAN hot water radiant panel meets all kinds of high space heating planning and aesthetic requirements-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

ECOPAN hot water radiant panel meets all kinds of high space heating planning and aesthetic requirements

time：2023-12-13
hits：687次
source：正弘奥能

In the cold areas of the north, winter heating is very important, especially the spacious and open workshop and open office area, and in the office area or industrial workshop with large space, only the traditional heating method can not provide enough heat to ensure the indoor temperature, and the heating equipment can only be hung on the surrounding wall, and the central area can not be fixed. However, the application of the suspended ceiling type hot water radiation panel has greatly solved this problem. 
 

	The heating route of the hot water radiation panel is consistent with the heating, which is the application of the boiler and the hot water pipe to form a loop to provide heat, and the difference is that the hot water radiation panel is suspended on the roof, which greatly saves the available space, and the hot water radiation panel has the advantages of uniform heat dissipation, fast thermal effect, quiet operation, etc. It has been increasingly applied to the workshop and office areas of industrial buildings.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20231213/20231213094117_16440.jpg" alt="" /> 

 
In general, in the case of no ceiling in the room, the radiation panel can be normally hung on the roof, but when there is a ceiling in the room, there is a problem, that is, the position relationship between the radiation panel and the ceiling and the connection practice, which not only involves the stability of the radiation panel and the ceiling and the heat dissipation effect of the radiation panel, but also affects the overall aesthetic effect. 
 

	ECOPAN hot water radiant panels are prefabricated in the factory into a standard length of 3 meters, 6 meters (special requirements can be prefabricated 2 meters, 4 meters). Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. Modular splicing is adopted between each radiation panel. The radiation panel pipe connection adopts advanced clamping technology, fast connection, simple and convenient, to a certain extent can shorten the construction period and save labor costs. After the pipe connection is complete, insert decorative cover plates between the radiant panels to cover the connection area and make the product look more beautiful. The decorative cover plate is fixed with a fixing card, which saves installation time and makes the installation work more time-saving and efficient. The decorative cover plate has the same profile as the motherboard, and laboratory tests confirm that the thermal energy efficiency of the decorative cover plate is exactly the same as that of the radiant panel.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20231213/20231213093956_13625.jpg" alt="" /> 

 
With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs. The models and accessories of ECOPAN hot water radiant panels can meet any heating planning, functional and aesthetic requirements of tall space buildings.