Gas radiation heating method is adopted for industrial plants with large space. Is the investment big?-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

Gas radiation heating method is adopted for industrial plants with large space. Is the investment big?

time：2023-04-27
hits：627次
source：正弘奥能

In the heating of tall space industrial buildings, choose gas radiation heating equipment, only need to take over the gas pipe network, and install pressure regulating equipment at the entrance of the system, do not need to install heating boilers and other ancillary equipment, no heating water circulation system, a investment is greatly reduced. At the same time, because of the high temperature of the radiation tube, low gas consumption, but also can greatly save energy investment. 
 
The choice of gas radiation heating equipment, save the huge and complex boiler and boiler room equipment, the system structure is simple, short installation cycle, does not occupy the building area, radiation pipelines are generally installed in the upper part of the building heating space, so rarely occupy or do not occupy the building area, saving valuable building land. 
 
Heat propagation is very directional. Can according to different needs, flexible layout, can carry out comprehensive heating, can also be in a large space, in the local area of heating, according to the need of heating, can greatly save energy consumption. 
 
In terms of fire safety, many customers and designers will think that the use of gas radiation heating equipment needs to introduce natural gas and liquefied petroleum gas pipelines into the workshop, which will certainly increase the risk of river, so that the fire risk level of the building will be elevated. IMPRESIND gas radiation heating equipment imported from Italy, introduced by Leadway Power&nbsp;Co., LTD., is an Impresind gas radiation heating equipment imported from Italy. The heating generator is installed outdoors to avoid fire protection and other risks. Besides, the combustion in the equipment can only be carried out when the radiation pipe is under negative pressure, and the pipelines and valves are strictly sealed. The gas produced after combustion is discharged directly to the outside, which meets the requirements of domestic environmental protection. 

	 


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20230504/20230504155737_99486.jpg" alt="" />