What equipment is used for heating in large-space industrial plants with good effect and low cost?-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

What equipment is used for heating in large-space industrial plants with good effect and low cost?

time：2023-12-26
hits：481次
source：正弘奥能

The high space of industrial plants is poor compared with the empty insulation effect, the use of traditional flow heating will cause energy waste, the heat rise is mostly concentrated in the upper space of the plant, the heat is cold, and the people or machines working below can not feel the heat at all. In fact, high-space industrial plants have many areas that do not need heating, such as corridors, or product semi-finished products and packaging materials stacking areas, which do not need heating at all. We only need to heat the local heating around the equipment area or the working area of the workers on the station, and infrared radiation heating is to fully meet the needs of the heating of tall space industrial plants. 
 

	Infrared radiation heating is to cause enough radiation intensity in a certain space to maintain the heating effect, and the indoor temperature gradient is smaller than that of convective heating, which can greatly reduce the heat loss in the upper part of the house. At the same time, due to the decrease of hot pressure, the corresponding cold air permeability also decreases. Infrared radiation directly acts on the equipment or the human body, does not need to heat the air first, can be directed heating or local heating. At the same time, infrared radiation heating in some special occasions (such as local factory heating), can also achieve the heating effect that convective heating is difficult to achieve.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20231226/20231226102220_92268.jpg" alt="" />

 

	In the infrared radiation heating method, gas radiation heating radiation heating system with natural gas as energy saving energy can reach 30-50%, which can greatly reduce operating costs. Gas radiant heating system heating speed is fast, heat distribution is uniform, body feeling is comfortable and soft; The convection effect is very small, avoid the ash phenomenon in the industrial plant, and improve the health conditions of the heating space.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20231226/20231226102209_20478.jpg" alt="" />

 

	IMPRESIND gas radiant heating, promoted and sold by Beijing Leadway Power Co., LTD., is an independent heating system, which can be installed on the roof or on the wall. The generator power of radiant heating is between 180 and 270KW, and the maximum length is 120 meters. The burner burns natural gas, and the hot fluid generated flows in the radiation tube under the drive of the smoke exhaust fan (vacuum pump), and the high temperature surface of the radiation tube stimulates the far infrared radiation wave. After the heat exchange of the hot fluid inside the radiation tube, part of the product will be recycled through the premix chamber (about 40%), and the other part will be discharged outside by the smoke exhaust fan. Secondary heating to achieve energy saving, environmental protection, high efficiency, reduce operating costs.

 
IMPRESIND gas radiant heating system has good adaptability, can meet the heating needs of industrial workshops, hangars, warehouses and other tall Spaces, to achieve on-demand heating, reduce energy and operating costs.