The modular hot water radiant panel meets the heating needs of large-space buildings-辐射板-红外线-热水辐射板-燃气辐射采暖-正弘奥能-伊普赛德-北京正弘奥能环保科技有限公司

The modular hot water radiant panel meets the heating needs of large-space buildings

time：2023-07-26
hits：713次
source：正弘奥能

Hot water radiant panel heating has been actively used worldwide since the 1950s, but in recent years, with the increasing emphasis on comfort and energy efficiency, the interest and demand for hot water radiant panel heating has increased significantly.The hot water radiant panel is mainly composed of precision steel pipe, radiant panel, thermal insulation material and assembly equipment.To explain it in the simplest way, the piping of hot water circulation heats the surface of the radiant panel.Specially coated panels that are heated transfer their heat to objects and people in the heating environment through radiation (infrared).Most of the infrared rays are absorbed by buildings, human bodies, equipment and other objects, storing energy, increasing the temperature, while heating the air around it, increasing the ambient temperature.The indoor air temperature gradient is small, and the heat loss is small, thus increasing the heating effect.


	 


	The water collector can be connected on the opposite side, and the heat medium enters from one side and exits from the other side.Or it can be connected on the same side, and the heat medium enters and exits on the same side.Hot water is piped to a radiant panel mounted on the ceiling of the room for heating.The hot water circulating in the radiant panel transfers its heat to the panel and returns to the heat source.


	 


	<img src="http://www.leadwaypower.com/Uploads/image/20230726/20230726111033_57697.png" alt="" /> 


	 


	The hot water radiant panel is modular.The required panel surface area can be obtained by combining the required number of modules of a specific size.In this way, the thermal needs of any space can be fully and accurately met.The interconnected water radiant panels not only create the required heating area, but also act as distribution pipes.In this way, it also saves pipe costs and labor in space.Heating the environment by evenly placing radiant panels on the ceiling ensures that the floor temperature is always 2-3 degrees Celsius higher than the indoor air temperature.This creates a more natural and comfortable feeling of warmth.


	 


	Compared to other conventional convection systems, the use of hot water radiant panels in the heating of industrial facilities, warehouses, gymnasiums, train maintenance stations, aircraft hangars, amphitheaters, animal farms, greenhouses and similar high-ceiling buildings can save 30-50% more energy.Hot water radiant panels have many important functions, especially when considering the heating of buildings with high ceilings and or high fire risk.


	<img src="http://www.leadwaypower.com/Uploads/image/20230726/20230726111528_46263.png" alt="" /> 


	 


	The hot water radiation panel promoted and sold by Beijing Leadway Power Co., Ltd. is prefabricated into a standard length of 3 meters and 6 meters in the factory (special requirements can be prefabricated into 2 meters and 4 meters).Each radiant panel can be connected by quick joint or welding.Each radiant panel and collection pipe is prefabricated in the factory and tested for safety.The bracket of the suspension plate is welded together with the radiant plate, one per meter, which greatly guarantees the flexibility of the installation.


	 


	The hot water radiant panel has a service life of 30 years and low maintenance cost.It does not require any special maintenance, but is insignificant compared to its energy-saving characteristics.Hot water radiation panel without electrical equipment, no flammable parts, hot water as a heat transfer medium, does not increase the fire rating of the building.It can be used in volatile and flammable built environments without the risk of fire and explosion.